Search
Log In
Code
Ar/Ab.AB4.02.C.08
Coded on
2007-06-09
Recorder
Alan Greene
Period
Late Bronze Age / Поздней бронзы
Remarks

A large rim-body portion of a "neck-less" LB karas. This sherd consists of 5 sub-fragments and a small amount of gypsum. Likely from the same vessel as Ar/Ab.AB4.02.C.09, 10, and 11. While the rim is rolled it is also formed into two surfaces, not left rounded. The lateral rim surface is also circumferentially indented, giving it a concave appearance and the impression of an "upwards" axis from the exterior. The decorative schema consists of two circumferential cord decorations spaced 9.2cm apart from each other on the vessel shoulder. The average interval between the cord ornaments is approximately 2cm. The different sub-fragments have undergone different weathering and burning, so the surface colors are not very consistent. The exterior is highly mottled with Gray GY1 5/N. Inferior from the 2 bands of cord ornaments, the shoulder and body portions of the vessel feature high amounts of "wiping" or textile impressions. These marks alternate between clear circumferential lines and areas of skew impressions. Superior to the cord bands the shoulder is smooth, save some minor rotational striations. Several slightly reflective areas in this area of the upper shoulder may suggest some remaining polish, but it may be abrasion-generated and largely unintentional. The interior surface rotational striations are largely obliterated. In addition to the coarse sand particles mentioned above, medium sand, very coarse sand, and grit are also visible in the fabric in moderate amounts. Moderate amounts of pyrite are also visible in both surfaces and pyrite popping is also present in moderate amounts. There is some delamination visible between core bands 1 and 2. Negligible amounts of white corrosion are visible on all surfaces. Breaks are hackly.

Status
Restored
Variant
Restricted / Закрытый Сосуд
Mode
Pithos / Карас
Possible Function
Indeterminate
Preservation
Incomplete
Extant Parts
Rim, Shoulder, Body
Hardness
Microcline
Inclusions
Coarse Sand
Sorting
Poorly Sorted
Surface Treatment (Exterior)
Slipped & Smoothed / Обмаз. Выглаженная
Surface Treatment (Interior)
Slipped & Smoothed / Обмаз. Выглаженная
Body
Axis
Inverted Cone / Обратно конич.
Profile
Convex / Выпуклый
Rim
Applied?
No
Rolled?
Yes
Axis
Outward (protruding) / Отогнутая
Modification
Indented / Трилистник
Plan
Circular / Круглый
Shape
2-Part / Двухскатный
Diameter
290.0mm
Diameter %
39.5%
Thickness
21.14mm
Shoulder
Axis
Cone / Коническая
Profile
Convex / Выпуклый
Measurements
Length (max)
423.0mm
Width (max)
139.05mm
Thickness
10.08mm
Colors

From Interior to Exterior

Interior Color
Very Dark Gray GY1 3/N
Exterior Color
Very Dark Gray GY1 3/N
Core Bands
Black GY1 2.5/N
Dark Gray GY1 4/N
Dominant Core Band
2
Decoration
Elements from Top to Bottom
Cord Pattern / Веревочный
Cord Pattern / Веревочный
Technologies from Top to Bottom
Press Tool / Вдавленный
Press Tool / Вдавленный